Heavy Duty Cleaner Detergent
Heavy Duty Cleaner for removal of tough oil grease and wax deposits.
It is a heavy duty non corrosive concentrated cost effective surfactant solution used for surface cleaning applications. This cleaning compound is soluble in fresh and salt water , also suitable with high presure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
For removing industrial oil, grease and wax.
Heavy Duty Cleaner Detergent is a highly concentrated, water-based alkaline cleaning and degreasing compound formulated for the removal of heavy grease, oil, dirt, soot, carbonaceous deposits and general industrial contamination from washable hard surfaces.
The product combines alkaline builders, detergents, surfactants, wetting agents, soil-suspending agents and sequestrants to provide rapid penetration and removal of difficult soils. Its high detergency assists in breaking the bond between oily contamination and the substrate, allowing loosened material to be suspended in the cleaning solution and subsequently removed by rinsing.
Heavy Duty Cleaner Detergent is particularly suitable for marine, offshore, workshop, industrial, engineering and general maintenance cleaning, where ordinary detergents are insufficient.
The product is supplied as a concentrated liquid and may be diluted with fresh water according to the degree and type of contamination.
Product details & specifications
Heavy Duty Cleaner Detergent is a concentrated, water-based heavy-duty alkaline cleaner specially formulated for the removal of industrial oils, heavy grease, waxes, oily deposits and hydrocarbon-based contamination from machinery, equipment and hard surfaces.
The product combines powerful alkaline builders, surfactants, wetting agents, emulsifiers and dispersing agents to penetrate and loosen difficult oily and waxy deposits.
It is particularly effective where contamination consists of thick lubricating grease, petroleum oils, wax residues and aged oily deposits that cannot be effectively removed using ordinary detergents.
The product penetrates beneath oily contamination, loosens its adhesion to the substrate and emulsifies the released oil and grease into the cleaning solution for subsequent removal by rinsing.
For wax and heavy grease removal, the use of warm or hot water is strongly recommended. Increasing the cleaning temperature softens wax and reduces the viscosity of heavy oils and grease, significantly improving penetration and cleaning efficiency.
How to easily clean Heavy Oil Grease, Wax Deposits using RXSOL Heavy Duty Cleaner HDC?
| Contamination | Recommended Product Concentration |
|---|---|
| Light oily film | 2-5% |
| Industrial oil | 5-10% |
| Heavy oil contamination | 10-20% |
| Heavy grease | 10-25% |
| Wax / oily wax deposits | 10-25% |
| Heavy aged oil, grease or wax | 20-50% |
| Severe localized contamination | Use concentrate after compatibility test |
For most industrial degreasing applications, a 5-20% solution is recommended as the starting range.
| Property | Typical Value |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Colour | Pale yellow to amber |
| Odour | Characteristic detergent odour |
| Specific Gravity @ 20°C | 1.05 - 1.12 |
| pH, neat | 11.5 - 13.0 |
| Solubility in Water | Completely miscible |
| Ionic Character | Anionic / non-ionic |
| Foam | Moderate |
| Flash Point | Not applicable for aqueous formulation |
| Flammability | Non-flammable under normal conditions |
| Base | Water-based alkaline detergent |
| Rinsability | Excellent |
For Heavy Grease Removal
For thick industrial grease:
Recommended concentration: 10-25%
- Remove excessive free grease mechanically where practical.
- Apply the prepared cleaning solution liberally.
- Allow 10-20 minutes contact time.
- Prevent the cleaning solution from drying on the surface.
- Scrub or agitate the grease deposits.
- Rinse thoroughly, preferably using warm high-pressure water.
- Repeat if necessary for exceptionally heavy deposits.
WAX REMOVAL
For wax, paraffin and wax/oil contamination, temperature is particularly important.
Recommended concentration:
10-25%
Recommended solution temperature:
50-70°C, where the equipment and substrate permit.
Apply the heated cleaning solution directly to the wax-contaminated surface.
Allow approximately 10-20 minutes contact time.
The heat helps soften the wax while the detergent penetrates and disperses the wax/oil contamination.
Agitate with a brush or mechanical cleaning system where practical.
Rinse thoroughly with hot or warm water.
For very thick wax deposits, bulk material should first be removed mechanically before chemical cleaning.
Do not allow melted or softened wax to cool and resolidify before removal or rinsing.
For Pressure Washing use 2-10% dilution rate...
Maintenance Cleaning chemicals for RIGS and oil field industries. RIGWASH Powder is powerful degreasing and emulsifying cleaning chemicals. RXSOL BRAND is most popular brand in MARINE and Oil Field industries as RIGS and Oil Field CHEMICALS supplier. RXSOL BRAND have various grade of RIGS CLEANING Detergent which includes RIG WASH LIQUID
Rigwash is classified cleaning detergent for offshore oil and gas rigs, platforms, and associated equipment. RIGWASH developed such a way to use by high-pressure water jets, detergents, and degreasers to remove dirt, grease, oil, and other contaminants that may have accumulated on the surface of the rig or equipment.
Regular use of Rigwash is important for maintaining the safety and efficiency of the equipment and reducing the risk of corrosion and damage.
Powerful Degreasing:
Designed for difficult industrial oil and grease rather than ordinary housekeeping contamination.
Effective Wax Removal:
The detergent/emulsifier system assists in removing softened petroleum and paraffinic wax deposits.
Hot-Water Performance:
Excellent performance when used with heated cleaning solutions for heavy grease and wax.
Concentrated:
Can be adjusted from light-duty oil cleaning to intensive degreasing simply by varying dilution.
Water Rinsable:
Oil, grease and softened wax contamination is dispersed into the cleaning solution and can be removed by thorough water rinsing.
Versatile:
One product can be used for machinery cleaning, degreasing, pressure washing, soaking and wax-removal operations.
Heavy Duty Cleaner HDC manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Heavy Duty Cleaner HDC at a competitive price from us. We have ready stock of Heavy Duty Cleaner HDC in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Heavy Duty Cleaner HDC ready stock in Abu Dhabi, Ruwais, UAE. Buy premium quality cost effective solutions for efficient wax, oil grease cleaning using RXSOL Heavy Duty Cleaner HDC. Stocks available in UAE, India and Oman.
#HeavyDutyCleanerHDC
#HeavyDutyCleanermanufacturerUAE
#HeavyDutyCleanerAbuDhabi