Test Kit For Water-62
-
Silver Nitrate Crystal AR
SILVER NITRATE is a transparent colourless or white crystal. Silver nitrate has powerful germicidal and antiseptic power.
-
-
-
Potassium Thiocyanate
Potassium Thiocyanate solution also used to determine Chloride, Bromide and Iodide in presence of Silver Nitrate with Potassium Thiocyanate titrant using a Ferric Alum Indicator.
-
Conductivity Standard 1413 µS/cm
The 1413 uS/cm conductivity solution allows calibration of instruments with a conductivity scale of up to 200 uS/cm for the measurement of pure or distilled water.
-
Conductivity Standard 84 µS/cm
The 84 uS/cm conductivity solution allows calibration of instruments with a conductivity scale of up to 200 uS/cm for the measurement of pure or distilled water.
-
-
Silica Gel Crystal White 100 Gram
Silica gel absorbs excess moisture and condensation. Packed as per the specific requirements.
-
-
-
-
-
Biochemical oxygen demand BOD Test Kit
Biochemical oxygen demand Test kits for measuring Biological Oxygen Demand in water and wastewater
-
-
-
TPTZ Iron Reagent
TPTZ method is most common method for low range Iron determination from the sample.
-
-
-
H2S vial (Bacteriological ) Kit
H2S vial (Bacteriological ) Kit is for checking Microbiological Quality of water. 1 PACK = 1 TEST
-
-
Sulphite (Sulfite) Test Kit indicator TK – 15
The determination of sulfite usually is made only on boiler waters or on waters that have been treated with catalyzed sodium sulfite for corrosion prevention.
-
Sulphite (Sulfite) Test Kit indicator TK – 14
The determination of sulfite usually is made only on boiler waters or on waters that have been treated with catalyzed sodium sulfite for corrosion prevention.
-
Sulphite (Sulfite) Test Kit indicator TK – 13
The determination of sulfite usually is made only on boiler waters or on waters that have been treated with catalyzed sodium sulfite for corrosion prevention.
-
SULFATE TEST KIT
This method is based on the precipitation of sulfate ion in such a manner as to form compound sulfate crystals of uniform size.
-
ALKALINITY Titration Method for Boiler & Cooling Water
Lab Testing method not suitable for on site testing, But this method is more accurate and scientifc
-
Acidity Test for Boiler – Cooling Water
Acids contribute to corrosiveness and influence certain chemical and biological processes so control of ACIDITY in water system must be required.
-
-
pHAST TEST pH Indicator
pHAST TEST is a ready to use surface alkalinity tester for stucco, masonry, concrete and painted surfaces.
-
Sulphite (Sulfite) Lab Test Method
The determination of sulfite usually is made only on boiler waters or on waters that have been treated with catalyzed sodium sulfite for corrosion prevention.
-
Potassium Iodide-Iodate Titrant
Standard potassium iodide-iodate titrant standardized to 0.0125N . Titrate with potassium iodide-iodate titrant until end point and faint permanent blue color develops.
-
Starch Acid- Sulfite Indicator Powder
Starch Acid/ Sulfite Indicator Powder for refill on Sulfite Test Kit
-
Sulfate Standard Solution
Glycerol sulfate solution is used to maintain proper crystal size in pricipitation of SUFATE, during SULFATE TEST. As The resultant turbidity of solution is measured at a wave length sensitive to turbidity on a photometer.
-
Glycerol Sulfate Solution
Glycerol sulfate solution is used to maintain proper crystal size in pricipitation of SUFATE, during SULFATE TEST. As The resultant turbidity of solution is measured at a wave length sensitive to turbidity on a photometer.
-
-
-
Chloride Test Reagent TK – 4
RXSOL TK4 Chloride Test Reagent, Gives reddish / pink / brown colour develop
